Specifications

4.2
Cab
Do not seat children less than 5 feet tall or 12 years
and under in the front
seats. Do not remove labels
regarding placement of children less than 5 feet tall
or 12 years and under in the front.
Do not modify the components or electrical wiring
of the restraint systems, including the installation
of additional trim material, badges, etc. over the
steering wheel hub or front door trim panels and
installation of additional electrical/electronic
equipment on or near restraint system components
and wiring.
Do not make any alterations or install additional
components in areas designated in Diagram (see
page 4.4). Alterations or installation of additional
components in the designated areas shown in
diagram can lead to restraint systems triggering
incorrectly or failing.
Any work on the restraint systems should only be
carried out by an authorized Sprinter dealer.
Damaged seat belts or belts stressed in an accident
must be replaced and their anchorage points
checked. Use only belts installed by an authorized
Sprinter dealer.
Do not pass belts over sharp edges.
Do not make any modifications that could change
the effectiveness of the belts. Airbag and
tensioners are designed to function on a one-time-
only-basis. An airbag or belt tensioner that was
activated must be replaced.
An airbag system component integrated in the
steering wheel gets hot after the airbag has
inflated. Do not touch!
When scrapping the airbag unit or emergency
tensioning reactor, follow the Sprinter safety
instructions. These instructions are available at
authorized Sprinter dealers.
Given the considerable deployment speed and
textile structure of the airbag, there is the
possibility of injuries and even death resulting from
airbag deployment.