Specifications

Cab
4.1
4.1 Seat Belts and Airbag
Compliance with Vehicle Safety Standards for Seat
Belts
Note: The Sprinter, when completed by DCAG, conforms
with all applicable national standards, including but not
limited to FMVSS/CMVSS 208, FMVSS/CMVSS 209,
FMVSS/CMVSS 210.
Any alteration of the seat location, seat belts, seat belt
anchorage points, seats, seat anchorage point, cab and
support structure as well as cab underbody may void this
certification. Alterations may require certification. Please
see section 1.3.3 and 1.6 for Intermediate Stage/Final
Stage Manufacturers regulatory responsibility and consult
with an attorney.
Seat, Seat Belts and Air Bags
Seat belts, belt tensioners and airbags are independent
restraint systems whose functions complement each
other.
For the safety of all occupants, seats, seat belts and
airbags must be used properly. Do not tamper with,
disconnect, or deactivate seat belt or airbag systems.
Alteration of seat location, seat belts, seat belt
anchor points, seats, seat, seat anchor points, cab
and support structure as well as cab under body
may result in system failure, bodily injury or death.