Specifications

Body Installation
2.7
2.11.2 Location of the Clearance
Lamps
If the width of the body installed is 80 “ or greater, Body
Builders must install at minimum, 2 yellow clearance
lamps/ 1 yellow identification lamp upfront, and 2 red
clearance lamps/ 1 red identification lamp on the rear of
the box to comply with FMVSS 108 and 49 CFR Part 568.
It is recommended that Body Builders install the front
lamps on the roof of the chassis cab within the shaded
area as shown in Drawing YY.
4"