Specifications

1.22

General Information

1.8.2 Calculating the Center of

Gravity

After installation or modification of the equipment,

vehicles must be weighed on a weighbridge in two

different positions.

The axle loads must be weighed when the vehicle is

horizontal (Gv1 and Gh1) and when one axle is raised by

amount "a" (Gv2 and Gh2; we recommend a = 500 mm).

The wheelbase RS1 (3,000 mm, 3,550 mm or 4,025 mm)

is defined by the vehicle model series (see Ordering) or

must be measured using a rule.

Measurement 1

N00.00-2688-00