Specifications

1.10
General Information
1.3.3.29 FMVSS 220 / CMVSS 220
This vehicle when completed, will conform to Standard
220, School Bus Rollover Protection, if no alterations are
made to the roof panel and its supporting structure,
including roof rails, front header, roof bows or roof pillars
,
the door window frames
, the windshield or its mounting
system or any window frame, subsequent to the delivery
by DCAG.
1.3.3.30 FMVSS 301 / CMVSS 301
This vehicle, when completed, will conform to Standard
301, Fuel System Integrity, if maximum unloaded vehicle
weight does not exceed 4,900 lbs. for cab chassis and
6,200 lbs. for passenger and cargo chassis or if no
alterations are made to the fuel system or fuel filler pipe
assembly. For cab chassis equipped with a body covering
the complete fuel tank assembly in accordance with
Section 2.11.1, the maximum unloaded vehicle weight is
6,200 lbs. Cargo and passenger vans produced in model
year 2004 or later conform to FMVSS 301 with a
maximum unloaded vehicle weight of 6,600 lbs.
1.3.3.31 FMVSS 302 / CMVSS 302
This vehicle, when completed, will conform to Standard
302, Flammability of Interior Materials, if no alterations are
made to any interior materials or if no non-conforming
interior materials are added to the interior of the vehicle.
1.4 Labels
The following compliance labels are required is to be
affixed at the locations noted in diagrams below.
VIN Plate
Exhaust Emission Control Information Label
Complete Vehicle Certification Label
Incomplete Vehicle Certification Label
Air Bag Warning Label
Tire and Loading Information Label