Specifications
1.8
General Information
compliance with the Standard 118 is necessary, if
subsequent alterations or installations are made.
1.3.3.14 FMVSS 119 /CMVSS 119
This vehicle, when completed, will conform to Standard
119, New Pneumatic Tires for Motor Vehicles Other Than
Passenger Cars, if tires maximum load ratings are not
exceeded, and no alterations or substitutions of tires,
including labeling are made.
1.3.3.15 FMVSS 120 / CMVSS 120
This vehicle, when completed, will conform to Standard
120, Tire Selection and Rims for Motor Vehicles Other
Than Passenger Cars, if the GAWR or GVWR are not
exceeded, and no alterations or substitutions are made to
tires, rims or labeling.
1.3.3.16 FMVSS 124 / CMVSS 124
This vehicle, when completed, will conform to Standard
124, Accelerator Control Systems, if no alterations are
made to any components of the throttle control or fuel
metering system.
1.3.3.17 FMVSS 201 / CMVSS 201
This vehicle, when completed, will conform to Standard
201, Occupant Protection in Interior Impact, if no
alterations are made to the instrument panel, instrument
panel interior compartment door, front door-mounted
armrests, sun visors, seats and armrests, or other interior
trims. Vehicles ordered with a D62 option, must be
retrofitted with a partition wall to comply with this Safety
Standard.
1.3.3.18 FMVSS 202 / CMVSS 202
This vehicle, when completed, will conform to Standard
202, Head Restraints, if no alterations are made to the
seat or head restraint.
1.3.3.19 FMVSS 204 / CMVSS 204
This vehicle, when completed, will conform to Standard
204, Steering Control Rearward Displacement, if no
alterations are made to the steering control system,
including but not limited to steering wheel, steering
column assembly, front structure, bumper and attaching
parts, or any other frontal components.
1.3.3.20 FMVSS 205 / CMVSS 205
This vehicle, when completed, will conform to Standard
205, Glazing Materials, if no alterations are made in the
glazing material installed in the windshield, or windows of
the cab, or of the passenger compartment.
1.3.3.21 FMVSS 206 / CMVSS 206
This vehicle, when completed, will conform to Standard
206, Door Locks and Door Retention Components, if no
alterations are made to the door assembly, door latches,