Specifications

Other Additional Information
13.1
13.1 Special Notes on Loading
Tail Gates
Observe the following instructions when installing loading
tail gates to the Sprinter:
– Loading tail gates must conform with all national
accident prevention regulations and guidelines.
– When installing tail gates, ensure that the permissible
rear axle load is not exceeded.
– Comply with the front minimum axle load.
– Test the loading tail gate stability only when the
vehicle is stationary.
– When installing an electro-hydraulic loading tail gate,
provide a heavy duty alternator and sufficient battery
power.
– Provide adequate underride protection and position
lights.
– The platform height must not exceed 1,000 mm, and
the load distance must not exceed 500 mm.
– Stabilizers are necessary on the front and rear axles.
13.2 Special Notes on Trailer
Coupling and Towing
The attachment of a trailer coupling must fulfill all national
laws and regulations, including but not limited to
guidelines such as the ISO/R 1102. In attaching a trailer
coupling, always take the clearance dimensions of the
Sprinter into consideration. Please refer to ISO 1103 in
this regard. When retrofitting trailer couplings, only use
brands and models tested and approved by DCAG.
Maximum permissible towing capacity: 5,000 lbs
Maximum tongue weight: 500 lbs
Disregarding these directions may cause the
vehicle to tip over. This may lead to serious injury
or death.