Specifications

Symptom:
P1480-GLOW PLUG INDICATOR ERROR
When Monitored and Set Condition:
P1480-GLOW PLUG INDICATOR ERROR
When Monitored: Witth the ignition on.
Set Condition: the ECM recieves a glow plug inidcator error message from the instru-
ment cluster over the CAN Bus.
POSSIBLE CAUSES
VERIFY CURRENT DTC
TEST ACTION APPLICABILITY
1 Turn the ignition on.
With the DRBIIIt, erase the ECM DTCs.
Perform several ignition key cycles leaving the ignition on for 10 seconds, then off for
10 seconds.
With the DRBIIIt, read the ECM DTCs.
Did this DTC set again?
All
Yes → Refer Refer to Instrument Cluster information for the related
symptom(s).
Perform ROAD TEST VERIFICATION - VER-2.
No → Test Complete.
79
DRIVEABILITY - DIESEL