Specifications

TABLE OF CONTENTS - Continued
P2259-TORQUE REDUCTION MESSAGE FROM HVAC- SWITCH SIGNAL
PLAUSIBILITY .........................................................196
P229-INSTRUMENT CLUSTER MESSAGE - AMBIENT TEMPERATURE SIGNAL
PLAUSIBILITY .........................................................197
P2306-SENSOR SUPPLY 2 VOLTAGE IS TOO HIGH .........................198
P2306-SENSOR SUPPLY 2 VOLTAGE IS TOO LOW .........................200
P2332-SENSOR SUPPLY 3 VOLTAGE IS TOO LOW .........................203
P2332-SENSOR SUPPLY 3 VOLTAGE IS TOO HIGH .........................206
P2333-S/C VEHICLE SPEED PLAUSIBILITY ................................209
P2338-S/C EXCESSIVE ACCELERATION ..................................209
P2338-S/C EXCESSIVE DECELERATION ..................................209
P2339-ECM CHECKSUM ERROR #1 ......................................211
P2339-ECM CHECKSUM ERROR #2 ......................................211
P2339-ECM INVALID CODING............................................211
P2339-ECM INVALID DATA ..............................................211
P2344-KICKDOWN SWITCH PLAUSIBILITY ................................212
P2347-AUTOMATIC TRANSMISSION CODED AS MANUAL TRANSMISSION .....213
P2347-CAN BUS CIRCUIT INTERUPTION..................................213
P2347-MANUAL TRANSMISSIO CODED AS AUTO TRANSMISSION ............213
P2347-WRITE ERROR TO EEPROM ......................................213
P2351-ECM SUPPLY VOLTAGE TOO LOW .................................214
P2359-BOOST PRESSURE TOO HIGH ....................................216
P2359-BOOST PRESSURE TOO LOW.....................................216
P2511-EGR VALVE SIGNAL CIRCUIT SHORTED TO GROUND ................218
P2527-EGR VALVE SIGNAL CIRCUIT OPEN CIRCUIT........................218
P2527-EGR VALVE SIGNAL CIRCUIT SHORTED TO GROUND ................218
P2514-CRANKCASE VENT HEATER OPEN CIRCUIT ........................221
P2514-CRANKCASE VENT HEATER SHORTED TO GROUND .................221
P2514-CRANKCASE VENT HEATER SHORTED TO VOLTAGE.................221
P2521-IMPROPER START ATTEMPT ......................................224
P2527-EGR VALVE SIGNAL CIRCUIT SHORTED TO VOLTAGE ................225
P2531-FUEL INJECTOR 1 READ TOO LARGE..............................227
P2531-FUEL INJECTOR 1 READ TOO LARGE..............................227
P2531-FUEL INJECTOR 1 READ TOO SMALL ..............................227
P2531-FUEL INJECTOR 1 READ TOO SMALL ..............................227
P2532-FUEL INJECTOR 2 READ TOO LARGE..............................227
P2532-FUEL INJECTOR 2 READ TOO LARGE..............................227
P2532-FUEL INJECTOR 2 READ TOO SMALL ..............................227
P2532-FUEL INJECTOR 2 READ TOO SMALL ..............................227
P2533-FUEL INJECTOR 3 READ TOO LARGE..............................227
P2533-FUEL INJECTOR 3 READ TOO LARGE..............................227
P2533-FUEL INJECTOR 3 READ TOO SMALL ..............................227
P2533-FUEL INJECTOR 3 READ TOO SMALL ..............................227
P2534-FUEL INJECTOR 4 READ TOO LARGE..............................227
P2534-FUEL INJECTOR 4 READ TOO LARGE..............................227
P2534-FUEL INJECTOR 4 READ TOO SMALL ..............................227
P2534-FUEL INJECTOR 4 READ TOO SMALL ..............................227
P2535-FUEL INJECTOR 5 READ TOO LARGE..............................227
P2535-FUEL INJECTOR 5 READ TOO LARGE..............................227
P2535-FUEL INJECTOR 5 READ TOO SMALL ..............................227
P2535-FUEL INJECTOR 5 READ TOO SMALL ..............................227
P2606-CMP/CKP SYNCHRONIZATION ERROR .............................229
*CHECKING THE FUEL PRESSURE SENSOR CIRCUITS.....................232
ix