Specifications
TABLE OF CONTENTS - Continued
P1480-GLOW PLUG INDICATOR ERROR ...................................79
P1482-GLOW PLUG MODULE - COMMUNICATION ERROR....................80
P2537-GLOW PLUG CONTROL CIRCUIT PREGLOW FAULT ...................80
P2537-GLOW PLUG CONTROL CIRCUIT PREGLOW SHORT TO GROUND.......80
P2537-GLOW PLUG CONTROL CIRCUIT PREGLOW SHORT TO VOLTAGE ......80
P1482-GLOW PLUG MODULE - EXCESS CURRENT..........................82
P2133-GLOW PLUG #1 CIRCUIT EXCESSIVE CURRENT......................82
P2133-GLOW PLUG #1 CIRCUIT OPEN CIRCUIT ............................82
P2133-GLOW PLUG #1 CIRCUIT SHORT TO GROUND .......................82
P2133-GLOW PLUG #1 CIRCUIT SHORT TO VOLTAGE .......................82
P2134-GLOW PLUG #2 CIRCUIT EXCESSIVE CURRENT......................82
P2134-GLOW PLUG #2 CIRCUIT OPEN CIRCUIT ............................82
P2134-GLOW PLUG #2 CIRCUIT SHORT TO GROUND .......................82
P2134-GLOW PLUG #2 CIRCUIT SHORT TO VOLTAGE .......................82
P2135-GLOW PLUG #3 CIRCUIT EXCESSIVE CURRENT......................82
P2135-GLOW PLUG #3 CIRCUIT OPEN CIRCUIT ............................82
P2135-GLOW PLUG #3 CIRCUIT SHORT TO GROUND .......................82
P2135-GLOW PLUG #3 CIRCUIT SHORT TO VOLTAGE .......................82
P2136-GLOW PLUG #4 CIRCUIT EXCESSIVE CURRENT......................82
P2136-GLOW PLUG #4 CIRCUIT OPEN CIRCUIT ............................82
P2136-GLOW PLUG #4 CIRCUIT SHORT TO GROUND .......................82
P2136-GLOW PLUG #4 CIRCUIT SHORT TO VOLTAGE .......................82
P2137-GLOW PLUG #5 CIRCUIT EXCESSIVE CURRENT......................82
P2137-GLOW PLUG #5 CIRCUIT OPEN CIRCUIT ............................82
P2137-GLOW PLUG #5 CIRCUIT SHORT TO GROUND .......................82
P2137-GLOW PLUG #5 CIRCUIT SHORT TO VOLTAGE .......................82
P1482-GLOW PLUG MODULE - INCORRECT TIMER .........................85
P1482-GLOW PLUG MODULE - INTERNAL FAULT ...........................85
P2538-GLOW PLUG MODULE COMMUNICATION ERROR .....................85
P2538-GLOW PLUG MODULE EXCESSIVE CURRENT ERROR.................85
P2538-GLOW PLUG MODULE TIMER ERROR ...............................85
P1610-ENGINE CONTROL RELAY PLAUSIBILITY ............................87
P1610-ENGINE CONTROL RELAY SHUTS OFF TOO EARLY ...................89
P1610-ENGINE CONTROL RELAY SHUTS OFF TOO LATE ....................91
P1611-SENSOR SUPPLY 1 VOLTAGE IS TOO HIGH ..........................94
P1611-SENSOR SUPPLY 1 VOLTAGE IS TOO LOW ..........................96
P1612-IGNITION VOLTAGE - VOLTAGE ERROR .............................99
P1615-ECM VOLTAGE SUPPLY IS TOO HIGH ..............................100
P1615-ECM VOLTAGE SUPPLY IS TOO LOW...............................100
P1630-IMMOBILIZER ...................................................102
P1630-IMMOBILIZER ...................................................102
P1630-IMMOBILIZER ...................................................102
P1630-IMMOBILIZER ...................................................102
P2201-IMMOBILIZER CAN MESSAGE ERROR..............................102
P2243-NO MESSAGE RECEIVED FROM SKREEM ..........................102
P1681-ACM CIRCUIT FAULT.............................................104
P1681-ACM CIRCUIT SHORT TO VOLTAGE ................................104
P2009-WATER IN FUEL SENSOR - WATER IN FUEL.........................106
P2009-WATER IN FUEL SENSOR SIGNAL ERROR ..........................106
P2010-MASS AIR FLOW SENSOR NEGATIVE DEVIATION ....................110
P2010-MASS AIR FLOW SENSOR POSITIVE DEVIATION.....................110
P2068-MASS AIR FLOW SENSOR PLAUSIBILITY SIGNAL RATIO TOO LARGE. . .110
P2068-MASS AIR FLOW SENSOR PLAUSIBILITY SIGNAL RATIO TOO SMALL . . .110
v