Operating instructions

2. Fasten your seatbelt (Fastening theseatbelt will cancel

any chiming that may confuse you during this program-

ming procedure).

3. Place the key into the ignition.

4. Turn the ignition to the ON position ( Do not start the

engine ).

5. Press and hold the UNLOCK button on the key fob.

6. After holding the UNLOCK button for four seconds,

also press the PANIC button within 6 seconds.

7. Whena single chime is heardrelease bothbuttons. The

chime is an indication that you have successfully entered

program mode. All fobs that are to be programmed must

be done so within 60 seconds of when the chime was

heard.

8. Using the fob to be programmed, press and release

both the LOCK and UNLOCK buttons, simultaneously.

9. A single chime will be heard.

10. Within four seconds of hearing the chime, press and

release the UNLOCK button on the fob.

11. A single chime will be heard.

12. Repeat steps 8 through 10 to program up to six

additional fobs.

13. Turn the ignition to the OFF position.

14. Your vehicle will remain in program mode up to 60

seconds from when the original chime was heard. After

60 seconds, all programmed fobs function normally.

NOTE: If you do not have a programmed transmitter,

contact your dealer for details.

THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 23

Information Provided by: