User Guide

To change tuning reference: Press and hold the currently selected

program’s footswitch. The display will read tu. Turning the data wheel

will select one of 3 references, Standard or A, 1/2 step down or Ab, or

Whole step down or g tuning. Now guitars that are tuned a 1/2 or whole

step lower than standard will still read the normal letter of the selected

string in the display.

Factory Program Reset

Resetting the TEC8 will erase all User programs and restore them to their

original Factory settings. Remember, when resetting the TEC8, all previ-

ous User settings will be lost.

To reset the TEC8

1- With the power off, press and hold the Low EQ and Mid EQ effect

group buttons.

2- Connect the power while still hold the buttons down. The display will

read:

At this point, all User presets will now be restored to their original Factory

settings

Signal Processing