SR 400D manual 6/8/99 10:54 AM Page 1 S Harman Music Group Inc. Visit DOD on the World Wide Web at http://www.dod.
SR 400D manual 6/8/99 10:54 AM Page 2 IMPORTANT! FOR YOUR PROTECTION, PLEASE READ THE FOLLOWING: WATER AND MOISTURE: Appliance should not be used near water (e.g. near a bathtub, washbowl, kitchen sink, laundry tub, in a wet basement, or near a swimming pool, etc). Care should be taken so that objects do not fall on and liquids are not spilled into the enclosure through openings.
SR 400D manual 6/8/99 10:54 AM Page 1 Signal Processing Table of Contents Warranty ..........................................................................................................................................................iv Introduction ....................................................................................................................................................2 Safety Precautions ......................................................................................
SR 400D manual 6/8/99 10:54 AM Page 2 Signal SignalProcessing Processing INTRODUCTION Congratulations and thank you for your purchase of the DOD SR 400 D room delay processor. With the SR 400 D room delay, dialing-in the unique sounds and characteristics of each venue is a breeze. The SR 400 D lets you enter in information such as Delay time, Room temperature and humidity and then it takes care of all of the calculations for optimizing the sound of the room.
SR 400D manual 6/8/99 10:54 AM Page 3 Signal SignalProcessing Processing SECTION 1 - GETTING STARTED Supplying Power The SR 400 D, like any piece of computer hardware, is sensitive to voltage drops, spikes and surges. Interference such as lightning or power "brownouts" can seriously, and in extreme cases, permanently damage the circuitry inside the unit.
SR 400D manual 6/8/99 10:54 AM Page 4 Signal SignalProcessing Processing the display to the right when the SR 400 D is in utility mode. 3) UTILITY - This button is used to put the SR 400 D in Utility mode. Once in utility mode, the SR 400 lets you edit functions such as: Temperature, Humidity, delay units, humidity units, Screen contrast and Keyboard lock. 4) DISPLAY - The display of the SR 400 D shows all pertinent programming informa-tion of the SR 400 D.
SR 400D manual 6/8/99 10:54 AM Page 5 Signal SignalProcessing Processing 3) CHANNEL 2 XLR INPUT - This is the Channel 2 INPUT XLR connector 4) CHANNEL 1 XLR OUTPUT- This is the Channel 1 XLR Output connector. 5) BARRIER STRIP OUTPUT CONNECTION- This is the Barrier strip connection for the Channel 1 and 2 outputs of the SR 400 D. 6) CHANNEL 2 XLR OUTPUT - This is the Channel 2 Output XLR connector. 7) AC INPUT - Connect the included DOD PS 750 power supply here.
SR 400D manual 6/8/99 10:54 AM Page 6 Signal SignalProcessing Processing Mode Selection The Mode selection of the SR 400 D allows you to choose between a 1-In and 2-Out or a 2-In and 2-Out configuration. To select either of the two modes, press the button and use the to change the configuration mode. Once selected, press the button. To exit the Mode function, press the button again.
SR 400D manual 6/8/99 10:54 AM Page 7 Signal SignalProcessing Processing Temperature The temperature of a venue also plays a crucial role in affecting the Room delay. The SR 400 D allows you to enter in the current room temperature. Once the correct temperature is entered, the SR 400 D will re-calculate the Room delay so the correct delay is used.
SR 400D manual 6/8/99 10:54 AM Page 8 DECLARATION OF CONFORMITY Manufacturer’s Name: DOD Electronics Manufacturer’s Address: 8760 S. Sandy Parkway Sandy, Utah 84070, USA declares that the product Product Name: SR 400 D Product Options: All (with a Class II power adapter that conforms to the requirements of EN60065, EN60742, or equivalent).
