Specifications

16
PERFORMANCE CHECKLIST FOR THE
CHAPIN DUSTER MODEL 599
SET-UP PROCEDURES
 1. Apply a small amount of lubricating oil of medium
viscosity to the four (4) bearings designated by
"OIL" stamped at each of the bearings. This
should be done at least once a day during the
operating season.
 2. Check the gear case, located directly below the
handle, and fill it with at least 2 tablespoons of
light, graphite grease.
 3. Put on your personal protective gear.
 4. Pull open the top of the duster and add the dust.
Ensure that the pesticide is thoroughly dry and free
of foreign material. Replace the tank cover.
 5. Strap the duster onto your shoulders and adjust it
so that the brace rests comfortably on your waist.
 6. Add the extender wand to the flow outlet. The fan
shaped tip can be removed as needed.
OPERATING PROCEDURES
 7. Rotate the crank at the desired speed to achieve
the optimum flow rate.