Specifications

10
PERFORMANCE CHECKLIST FOR THE
HUDSON TEK HAND COMPRESSED
SPRAYER MODEL 67132
SET-UP PROCEDURES
 1. Rotate the handle on the tank and remove the
cover.
 2. Examine the gasket on the tank cover and replace
it if it is worn.
 3. Unscrew and gently remove the rod / piston
assembly from the cylinder.
 4. Remove the cylinder from the tank and examine
the gasket located at the top of the cylinder and
replace if worn.
 5. Examine the cylinder check valve located at the
bottom of the cylinder. If worn, replace the check
valve.
 6. Examine the leather piston cup on the bottom of
the piston to ensure that it is still pliable and not
cracking. If necessary, lubricate the cup with a
small amount of oil (any type of oil will do: engine,
mineral, etc.).
 7. Return the cylinder to the tank with the extended
lip pointed toward the outer rim of the tank.