Specifications

6
PERFORMANCE CHECKLIST FOR THE
CURTIS HAND COMPRESSED SPRAYER
MODEL 2981 PCC
(NSN 3740-00-191-3677)
SET-UP PROCEDURES
 1. Unscrew and gently remove the rod/piston
assembly from the tank.
 2. Unscrew the cylinder from the pump handle.
Examine the O ring at the bottom of the rod and
lubricate as needed with a small amount of oil.
 3. Examine the cylinder check valve located at the
bottom of the cylinder. Check the O ring at the top
of the cylinder. Reassemble the cylinder and pump
handle rod.
 4. Examine the pesticide hose for wear/cracks etc.
Make sure all hose connection sites at the tank
and the spray wand are not worn.
 5. Unscrew the wand where it connects to the
pesticide hose and pull out the inline filter. Clean
the filter as required. Screw the unit back together.
 6. Select the required (TeeJet) nozzle required for the
spray mission and screw onto the tip of the wand.