Specifications

Chapter 1
1 - 6
Figure 1.6 Front view of the 1500 series IP Application Switch
If you have physical access to the unit, you can use the front-panel LEDs to
assess the condition of the unit. For details about the behavior of the LEDs,
see Understanding LED behavior, on page 4-1.
Figure 1.7, following, illustrates the back of a IP Application Switch. Note
that all ports are labeled.
Figure 1.7 Back view of the 2U IP Application Switch
1. Management interface
2. Console port
3. Hard-wired fail-over port
4. 10/100/1000 interfaces
5. USB port
6. SFP Gbics
7. Status LEDs
8. LCD control buttons
1. Unused bay
2. Power input panel
3. Access panel