Compact, Fast and Easy to Use User Guide
CE Conformity and FCC Statement ………………… This equipment has been tested and found to comply with the limits of the European Council Directive on the approximation of the member states relating to electromagnetic compatibility according to EN 55022/55024 Part 15 B This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
Contents ………………… CE conformity and FCC Statement ………………………….1 Introduction to DocketPORT® 488 Scanner …….……........2 Software & Hardware Installation ………………….………3 Uninstall Scanner Driver Software …………………….……4 Install Scanner Hardware ….…………………………….…...5 Using Your Scanner ……………….……....…………….…...6 Tips & Cautions ………….……..…………………..……....7 Technical Support & Product Warranty Information …….…8 Welcome ………………… Thank you for purchasing our DocketPORT® 488 document scanner.
Software & Hardware Installation ………………… ** (FOR BEST RESULTS PLEASE INSTALL THE SOFTWARE FROM THE CD FIRST BEFORE CONNECTING THE SCANNER TO YOUR COMPUTER) ** Note: As a precaution, a RED warning label has been placed over the computer end of the USB plug to remind you to install the software CD first. Remove this warning label prior to using the USB cable. Install Scanner Driver Software a) Insert the installation CD into your CD-ROM drive. b) The installation program will begin automatically.
g) Click “Install” to begin the installation (Fig. 5). h) Click “Next” to finish installation (Fig. 6). Fig. 5 Fig.6 i) You will be redirected back to the main menu at the end of the installation. j) You can either install PageManager 7 and/or Adobe Reader 9.3 application now or later. Note: After you have completed all your software installations, we recommend that you restart your computer even though you are not requested by Windows to do so.
Install Scanner hardware a) Connect the USB cable (provided) to your computer and scanner (Fig. 1). b) Make sure the red warning label is removed before connecting this end to your computer. c) You may need to reconnect the cable to another USB port on your computer if the scanner cannot be detected. (Check your computer’s user guide to identify other available USB ports and their locations.) Fig.
Using your Scanner ………………… Note: Before using your scanner for the first time you must calibrate the unit. Performing Initial Scanner Calibration There are two different ways to calibrate your scanner: 1) From Windows a. Go to: Windows “START” / Control Panel / Devices and Printers (Scanners and Cameras for Windows Vista users) and you will see your model listed. b. Right click on your scanner model and a pull down window will appear.
Tips & Cautions ………………… Your DocketPORT® 488 scanner will provide you a long and productive service. We encourage you follow the suggestions listed below to prolong your investment and improve the convenience and quality of your scanning and document management experience. DO NOT introduce stapled items or pages into the scanner. DO NOT scan documents that have chipped or un-dried White-Out. DO NOT insert any type of adhesive material, even POST-IT paper.
Technical Support & Warranty ………………… FREE SUPPORT THROUGH EMAIL & WEB Visit our website at www.docucap.com. Click the Support section where you can access valuable information including: Installation guides, FAQ’s, spare parts ordering, troubleshooting, driver downloads, and email your scanner issue to support@docucap.com. TECHNICAL SUPPORT BY TELEPHONE 1-408-436-6152 (10:00 A.M. - 5:00 P.M. U.S.
