Scans Full Size Documents on Both Sides Simultaneously User Guide
CE Conformity and FCC Statement ………………… This equipment has been tested and found to comply with the limits of the European Council Directive on the approximation of the member states relating to electromagnetic compatibility according to EN 55022/55024 Part 15 B This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
Contents ………………… CE conformity and FCC Statement …………………………1 Introduction to DocketPORT® 487 Scanner ………………2 Software & Hardware Installation …………………………3 Uninstall Scanner Driver Software …………………………4 Install Scanner Hardware ….………………………………...5 Using Your Scanner ……………….……....…………….…. 7 Tips & Cautions ………….……..…………………..…….. 8 Technical Support & Product Warranty Information ………9 Welcome ………………… Thank you for purchasing our DocketPORT® 487 document scanner.
Software & Hardware Installation ………………… ** (FOR BEST RESULTS PLEASE INSTALL THE SOFTWARE FROM THE CD FIRST BEFORE CONNECTING THE SCANNER TO YOUR COMPUTER) ** Note: As a precaution, a RED warning label has been placed over the computer end of the USB plug to remind you to install the software CD first. Remove this warning label prior to using the USB cable. Install Scanner Driver Software a) Insert the installation CD into your CD-ROM drive. b) The installation program will begin automatically.
e) Check the EULA accept box then click “Next” (Fig. 3) above. f) The Choose Setup Type window shows two choices of installations, select the “Complete” button and allow the full installation (Fig. 4) above. g) During the installation the Windows Logo screen will appear stating that the software is not Windows certified. h) We assure you that our software driver has been fully tested to function properly under Windows environment, select the “Continue Anyway” button to proceed with the installation (Fig.
Install Scanner hardware a) Connect the USB cable (provided) to your computer and scanner. (Fig. 1) b) Make sure the red warning label is removed before connecting this end to your computer. c) You may need to reconnect the cable to another USB port on your computer if the scanner cannot be detected. (Check your computer’s user guide to identify other available USB ports and their locations. Fig. 1 Fig. 2 Fig.
d) Once your scanner is connected to your computer, the “Found New Hardware Wizard” window will appear. e) Choose the “No. not this time” then click “Next”. (Fig.2) Make sure you select the “Install the software automatically (Recommended)” option in the second screen that follows. (Fig. 3) Fig. 4 f) g) Fig. 5 The “Hardware Installation” window will appear, this is normal and to be expected. (Fig. 4) Select the “Continue Anyway” then the “Finish” button to finalize your scanner installation. Fig.
Using your Scanner ………………… note: Before using your scanner for the first time you must calibrate the unit. Performing Initial Scanner Calibration There are two different ways to calibrate your scanner: 1) Calibrate from Scanners and Cameras under Control Panel a. Go to: Windows “START” / Control Panel / (Printer and Other Hardware) Scanners and Cameras and you will see your model listed here. b. Right click on your scanner model and a pull down window will appear. c.
Using DocketPORT® 487 scanner with other applications DocketPORT® 487 scanner is fully TWAIN compliant, you can use it with literally hundreds of applications that use standard TWAIN device input. From desktop publishing to games, and from faxing to business card scanning, you will discover many useful applications for this scanner. Simply select the scanner source from your program’s “source” options and look for the DocketPORT® 487 list.
Technical Support & Warranty ………………… FREE SUPPORT THROUGH EMAIL & WEB Visit our website at www.docucap.com. Click the Support section where you can access valuable information including: Installation guides, FAQ’s, spare parts ordering, troubleshooting, driver downloads, and email your scanner issue to support@docucap.com. TECHNICAL SUPPORT BY TELEPHONE 1-408-436-6152 (10:00 A.M. - 5:00 P.M. U.S.
