Instruction manual

35
Basic Operation
Sound/Screen Setting
Sound settings
You can set tones, such as changing a ring alert,
adjusting the volume, or muting the sound
emitted from FOMA terminal.
You can set your favorite melody, etc. for a ring
alert.
<Example> Setting voice call ring tone
a meh Setting eb Sound/Vibration/
Manner
ea Ring tone ea Call ring tone
e Set required items eC [Set]
Point
･ When Voice call ring tone is set, the setting applies to
Incoming call.
･ Some music or moving pictures/i-motion may not be
set to the ring alert.
You can set the volume of a ring alert, alarm
sound, etc.
a meh Setting eb Sound/Vibration/
Manner
ec Adjust volume e Move the
cursor to the item
eheC [Set]
You are notified of an incoming call or alarm with
vibration, instead of sound.
a meh Setting eb Sound/
Vibration/Manner
ed Vibration mode
e Set required items eC [Set]
This function mutes the sound emitted from the
FOMA terminal such as ring alert, Keypad sound,
Touch sound, open/close operation sound, Alarm
sound, confirmation sound for reading a code
with Bar code reader, and notifies incoming calls
with vibrator (vibration). The microphone is
sensitized in Silent mode, and you can call in a
small voice.
a # (1 sec. or more)
appears on the stand-by display in Silent
mode.
Canceling Silent mode : # (1 sec. or more)
Point
･ Shutter sound, Auto focus lock sound for shooting
still pictures, and count down sound of Auto timer
are emitted even in Silent mode.
Set sounds emitted for key operation, touch
operation, opening/closing the FOMA terminal,
and shutter sound for shooting still images or
moving pictures (including recording for Voice
recorder).
a meh Setting eb Sound/Vibration/
Manner
eb Other sounds ed System
sound
e Set required items eC [Set]
Point
･ Even if the key touch sound, touch sound is set to
sound, no sound is made while i-
α ppli is activated.
Ring tone
Adjust volume
Vibration mode
Silent mode
System sound