Instruction manual

31
Basic Operation
Screen Explanation
docomo Palette UI
In the right and left area of the stand-by display
(vertical), up to 12 MyFACEs downloaded from
sites, etc. can be pinned.
a Flick left or right or h
Switch screens one after another in the same
way to display MyFACE you want to use.
Point
･ Packet communication charges apply to refresh
content for other than MyFACEs set by default. Note
that using MyFACEs set by default is also charged if
the i-mode access point is changed or while
international roaming.
Paste frequently-used function, data, etc. to the
stand-by display as icon. By selecting a pasted
icon, the function or data can be activated quickly.
MyFACE
Shortcuts
Screen Explanation
Using touch panel
Notes for using the touch panel
･ The touch panel is designed for being touched
lightly with fingers. Do not push it forcibly with
a finger or press it with sharp objects such as
nail, ballpoint pen, pin, etc.
･ Touching the touch panel may not work in the
following cases. Note that it may cause
malfunction.
- Operation with gloved hands
- Operation with tip of fingernail
- Operation with a foreign object on the display
- Operation with protective sheet or seal on the
display
- Operation on the wet touch panel
- Operation with finger wet with perspiration or
water
- Operation under water
･ Do not press forcibly the frame part around the
display. The touch panel may malfunction.
Point
･ Depending on the operation or function, effective
range for the touch operation may be different or
invalid.