Instruction manual

25
Basic Operation
Before Using
Attaching docomo mini UIM card/battery pack
After turning power OFF, close FOMA terminal
and hold it in your hand so that you can properly
attach docomo mini UIM card/battery pack.
✜ Removing back cover
✜ Attaching docomo mini UIM card
Point
･ Only docomo mini UIM card is available for the
FOMA terminal. If you have a UIM or FOMA card,
bring it to docomo Shop to replace.
✜ Installing battery pack
✜ Installing back cover
Point
･ Make sure the locations of the slots for docomo mini
UIM card and microSD card. If the cards cannot be
removed, bring the FOMA terminal to a docomo
Shop.
b Press and slide the back cover
in the arrow direction approx.
2 mm to remove
a Slide the lever in the direction
a to unlock
Back cover
With facing IC side of the docomo mini UIM card down,
insert to the slot slowly and push it until it clicks
IC
Corner cut
docomo mini UIM card
With the label side up, fit the
convex parts to the concave
parts of the FOMA terminal
and insert in the
a direction,
then push in the
b direction
to set in.
Convex parts
Concave parts
aa
b
c
b Slide the lever in the direction c
to lock
a Fit the 8 tabs to the notches of the
FOMA terminal and push in the
direction
a not forming any
clearance, then slide in the
direction
b .