Instruction manual

32
*1 Registered in FOMA terminal by &W command.
*2 Not reset by &F and Z commands.
*3 When Z command is executed before the &W command, the terminal is reset to the last status registered in memory, and
prior changes are erased.
◆ Disconnection reason list
■ Packet communication
AT+GMI Display FOMA terminal manufacturer name.
AT+GMI
FUJITSU
OK
AT+GMM Display model name of FOMA terminal.
AT+GMM
FOMA F02D
OK
AT+GMR Display FOMA terminal version.
AT+GMR
Ver1.00
OK
AT+IFC=<n,m>
*1
Set how to control local flow between a PC and FOMA terminal.
n, m=0 : No flow control n, m=1 : Perform XON/XOFF flow control
n, m=2 : RS/CS (RTS/CTS) Perform flow control (default)
AT+IFC? : Display the current settings and status in the "+IFC : <n>,<m>" format (n is the
value of DCE by DTE, and m is the value of DTE by DCE)
AT+IFC=? : List of the settable values is displayed
AT+IFC=2,2
OK
AT+WS46=<n>
*1
Display wireless network used when sending communication in n number.
When entering AT+WS46=<n>, ERROR is returned because it cannot be changed.
n=12 : GSM network n=22 : 3G network (FOMA)
n=25 : GSM or 3G network (FOMA) (fixed value)
AT+WS46? : Display current settings AT+WS46=? : Display a list of assignable values
AT￥S
Display the currently set commands and S register settings.
AT￥S
E1 Q0 V1 X4 &C1 &D2
&S0 ・・・ (snip) ・・・
S104=001
OK
AT￥V<n>
*1
Set whether to use expanded result codes when connection is made.
n=0 : Not use expanded result codes (default)
n=1 : Use expanded result codes
AT￥V0
OK
+++ Move from online data mode to online command mode when entered during a
communication.
The escape guard interval is 1 second (fixed value).
+++ (not displayed)
OK
Value Description
26 APN is not present or is incorrect.
27
30 Disconnected by network.
33 Terminal does not subscribe to packet communication.
36 Normal disconnection.
Upper slot : Command
Lower slot : Example
Description