Instruction manual

19
4
Enter the phone number of the dialup connection in "ダイヤルアップの電話番
号 (Dialup phone number)" ("＊99＊＊＊<cid>#" for packet communication)
with one-byte→Enter "ユーザー名 (User name)"→Enter "パスワード
(Password)"→Enter "接続名 (Connection name)" and click "接続 (Connect)".
<cid> : The number registered in P15 "Setting the dialup connection (APN)"
･ In "ユーザー名 (User name)" and "パスワード
(Password)", enter the user name and password
specified by your provider or network
administrator.
･ When the access point is mopera U or mopera,
you do not need to enter "ユーザー名 (User
name)" or "パスワード (Password)".
･ You cannot use "." (one-byte period) at the
beginning of "接続名 (Connection name)". Also,
the following characters (one-byte) cannot be
used.
￥/:＊?<>｜"
5
On the connecting screen, click "スキップ (Skip)".
･ Only make settings without connecting to the Internet right away.
6
On the "接続の使用準備ができました (Preparation for using is completed)"
screen, click "閉じる (Close)".
Under Windows Vista
a On the "インターネット接続テストに失敗しました (Failed in Internet connection test)" screen,
click "接続をセットアップします (Set up connection)".
b Click "閉じる (Close)".
7
On the "ネットワークと共有センター (Network and shared center)" screen,
click "アダプターの設定の変更 (Change adapter configuration)" appeared on
the left of the top.
Under Windows Vista
Click (Start)→"接続先 (Dialup connection)".
8
Right-click the dialup connection created and click "プロパティ (Property)".