Instruction manual

17
◆ Setting Show/Hide caller ID
You can set to show/hide call ID for packet communication at once.
Caller ID is your important information. Take care when deciding to disclose your caller ID.
･ If "Not notify" is set when using mopera U or mopera, connection is unavailable.
<Example> Setting under Windows XP
1
Perform Step 1 - 4 in "Setting the dialup connection (APN)".
2
Enter notify/not notify of caller ID in the format "AT＊DGPIR=<n>"→ .
<n> : 0-2
0 : Connect directly (Default)
1 : Connect prefixing 184 (Not notify)
2 : Connect prefixing 186 (Notify)
･ If nothing is displayed even when AT command is
entered, enter ATE1 and press .
3
Confirm that "OK" is displayed and click "ファイル (File)"→Click "ハイパー
ターミナルの終了 (End HyperTerminal)".
4
When confirming disconnection, click "はい (Yes)"→When confirming saving,
click "いいえ (No)".
❖ Show/Hide caller ID function by dialup network settings
The dialup network settings can also be used to append 186 (Notify)/184 (Not notify) to the dialup
connection number.
･ The Show/Hide of caller ID when both of the ＊DGPIR command and dialup network settings are set is
as shown below.
Setting made by ＊DGPIR
Dialup network
setting (<cid>=3)
command
No setting Caller ID is not sent Caller ID is sent
＊99＊＊＊3# Caller ID is sent Caller ID is not sent Caller ID is sent
184＊99＊＊＊3# Caller ID is not sent
186＊99＊＊＊3# Caller ID is sent