Instruction manual

16
3
Enter a fictional phone number (such as "0") for "電話番号 (Phone number)"
→Select "接続方法 (Connection method)"→Click "OK".
･ "市外局番 (Area code)" differs depending on the
PC environment. The code does not relate to
Dialup connection (APN) setup. So no need to
change.
･ Set as follows at "接続方法 (Connection method)"
field.
For USB cable connection : Select "FOMA F02D".
For Bluetooth connection : Select "ご使用の
Bluetoothリンク経由標準モデム (Standard
modem via Bluetooth link you use)" or
"Bluetooth機器メーカが提供しているBluetooth
モデム (Bluetooth modem provided by
Bluetooth device manufacturer)".
4
Click "キャンセル (Cancel)" on the "接続 (Connect)" screen.
5
Enter the dialup connection (APN) in the format "AT+CGDCONT =<cid>,
"<PDP_TYPE>", "<APN>""→
<cid> : Enter any number between 5-10.
<PDP_TYPE> : IP or PPP
<APN> : Dialup connection (APN)
･ +CGDCONT command→P33 "Supplement to AT
command"
･ If nothing is displayed even when AT command is
entered, enter ATE1 and press .
6
Confirm that "OK" is displayed and click "ファイル (File)"→Click "ハイパー
ターミナルの終了 (End HyperTerminal)".
7
When confirming disconnection, click "はい (Yes)"→When confirming saving,
click "いいえ (No)".