Instruction manual

26
Contents/Precautions
■
Opening the microUSB jack cover and
headset jack cover
Open the covers with your finger by the
grooves.
■
Closing the microUSB jack cover and
headset jack cover
Press the covers in the directions of the
arrows and ensure there are no gaps.
■
Removing back cover
1
Insert the tip of your finger into
the groove at the bottom of the
terminal, and lift up the back cover
in the direction of the arrow ( ).
■
Attaching back cover
1
Check the orientation of the back
cover, and attach it to the terminal
( ), then press down the part
firmly, and then check that there
are no gaps between the terminal
and back cover ( ).
･
Be careful not to hook the projection
part on the edge of the back cover with
finger when attaching the back cover.
Groove
Groove
Groove
Back cover