Instruction manual

217
Applications
the discretion of the U.S. Department of
Defense.
･
Some wireless communications products
(mobile phone, data detectors and some
others) block satellite signals and also causes
instability of signal reception.
･
Some map displays based on location
information (latitude/longitude information)
may be not accurate due to some countries'
or regions' regulations.
■
Where radio waves are difficult to
receive
Note that radio waves may not be received
or it may be difficult to receive radio waves
in the following conditions, since GPS uses
radio waves from a satellite.
･
Inside or immediately under a building
･
Inside a bag or box
･
Inside or under a thick covering of trees
･
In a car, inside a train compartment
･
When there are obstructions (people or
objects) near the terminal
･
Inside a basement or tunnel, and below
the ground or water
･
In buildings-clustered or residential area
･
Near a high-voltage cable
･
Bad weather such as heavy rain or snow
❖
Note
･
If some of the GPS functions are not available, or if
none of them are, check that your contract includes
the use of the Internet, and see "Wireless & networks"
(P.118).
･
NTT DOCOMO is not liable for navigation services or
for the accuracy of location services.
Enabling GPS function
1
From the Home screen, tap ,
then tap [Settings].
2
Tap [Location services].
3
Tap [GPS satellites].
4
Read the note and tap [Agree].
･
"GPS satellites" checkbox is marked.
❖
Information
･
Alternatively, drag the status bar downwards, tap ,
then read the notes and tap [Agree] to enable the
GPS function.
Enabling current location search
Enable to search a current location using
mobile network and Wi-Fi.
1
From the Home screen, tap ,
then tap [Settings].
2
Tap [Location services].
3
Tap [Google's location service].
4
Read the note and tap [Agree].