Instruction manual

173
Applications
Receiving data
1
Make sure that the Reader/Writer,
P2P function is on.
2
Face the marks each other with
the sending terminal.
･
When data is received, an application
that supports the data opens. Follow
the onscreen instructions.
･
When holding mark over the other device,
make sure not to hit the terminal strongly.
･
Hold the mark over parallel to the center of
the other device.
･
When holding mark over the other device,
move it closer slowly.
･
If mark is not recognized even when
holding over the device, try lifting the
terminal slightly, or moving the terminal back,
forth and around.
･
If there are metal objects between mark
and the other device, scanning may be failed.
And note that a sticker put on nearby the
mark may affect communication
performance.
Use "NFC/Osaifu-Keitai lock" settings to
restrict the use of Osaifu-Keitai function and
related services.
･
NFC/Osaifu-Keitai lock is different from screen
lock for the terminal, SIM card lock.
1
From the Home screen, tap ,
then tap [Settings]
u
[More...].
2
Tap [NFC/Osaifu-Keitai
settings]
u
[NFC/Osaifu-Keitai
lock].
3
Enter a password, then tap [Next].
･
Osaifu-Keitai function is locked, and
or is displayed in the status bar.
･
When using "NFC/Osaifu-Keitai lock" for
the first time, set password, secret
question and answer. Follow the
onscreen instructions.
Notes on holding the mark over
the other device such as a
reader or device with the NFC
module
mark
Locking Osaifu-Keitai function