Instruction manual

172
Applications
･
Set Reader/Writer, P2P function ON in
advance (P.172).
･
Place 2 mobile phones in parallel position and
point marks to each other. Do not move
them until sending/receiving is complete.
･
Available operations to send/receive or
available data to send/receive depends on
the compatible applications. Follow the
onscreen instructions.
･
Even if marks are pointed to each other,
sending/receiving may be failed. If failed,
perform operations of sending/receiving
again.
･
When pointing marks to each other slowly,
sending/receiving may be failed.
･
The terminal does not communicate with all
NFC devices.
Set Reader/Writer, P2P function to ON
1
From the Home screen, tap ,
then tap [Settings]
u
[More...].
2
[NFC/Osaifu-Keitai
settings]
u
[Reader/Writer,
P2P]
u
[OK].
･
"Reader/Writer, P2P" and "Android
Beam" are marked.
･
Reader/Writer, P2P function is enabled,
and appears in the status bar.
❖
Information
･
Alternatively, from the Home screen, use "NFC Quick
Launch" to enable/disable Reader/Writer, P2P
function.
Sending data
1
Make sure that the Reader/Writer,
P2P function is on.
2
Display data to send on the screen.
3
Face the marks each other with
the receiving terminal.
･
The displayed screen becomes small,
and "Touch to beam" appears.
4
Tap the screen that has become
small.
mark