Instruction manual

131
Settings
Setting Silent mode
1
From the Settings screen (P.118),
tap [Sound]
u
[Silent mode].
2
Tap any of [Off]/[Vibrate]/[Mute].
❖
Information
･
Alternatively, press and hold
p
for over a second
and then tap / / in the pop-up screen, or
drag the status bar downward and tap / /
to switch Mute (Ringtone 0), Vibrate or Off (disabling
Silent mode).
･
Setting the phone to Silent mode does not mute
sounds for shutter, playback of video or music, alarm,
dialpad operation sound during a call or when [End
call] is tapped, etc. Note that adjusting volume for
"Ringtone & notifications" in Volumes (P.130) or
pressing the upper part of
m
cancels Silent
mode.
Setting a ringtone
1
From the Settings screen (P.118),
tap [Sound]
u
[Phone ringtone].
2
Select a ringtone and tap [Done].
❖
Information
･
You can set voice file in ".wav"/".m4a" or in other
format which is transferred from Media Go (P.158) or
downloaded from the Internet as a ringtone.
･
To set a ringtone other than the ones stored by
default, tap .
Setting a notification ringtone
1
From the Settings screen (P.118),
tap [Sound]
u
[Default
notification].
2
Select a ringtone and tap [Done].
❖
Information
･
To set a notification other than the ones stored by
default, tap .
Setting vibration when receiving a
call
1
From the Settings screen (P.118),
tap [Sound] and mark "Vibrate on
ring".
･
Ringtone sounds and the terminal
vibrates when there is an incoming call.
Setting touch tones to ON
1
From the Settings screen (P.118),
tap [Sound].
2
Mark "Dial pad touch tones" and
"Touch sounds".
･
If you unmark them, any operation
tones do not sound when you tap.