Instructions / Assembly

DocaPole 30ft Hard Bristle Brush Assembly Instructions

1. To adjust extension pole length, raise thumb levers

and pull out pole segments to desired length, then

lower thumb levers to lock into place

2. Use the plastic hinge tip as needed to adjust the angle

of the desired attachment. Simply screw the female

plastic hinge tip directly onto the male metal tip of

the pole, then screw your attachment onto the

angled hinge tip (make sure it is locked into place by

turning the dial on the side).

3. Screw the Hard Bristle Brush directly onto the Metal

Tip of the Pole. If you need the brush to be at an

angle, use the included plastic Hinge Tip and adjust

the angle as needed.

4. Enjoy your DocaPole and Hard Bristle Brush!

PAGE 1
DocaPole 30ft Hard Bristle Brush Assembly Instructions 1. To adjust extension pole length, raise thumb levers and pull out pole segments to desired length, then lower thumb levers to lock into place 2. Use the plastic hinge tip as needed to adjust the angle of the desired attachment. Simply screw the female plastic hinge tip directly onto the male metal tip of the pole, then screw your attachment onto the angled hinge tip (make sure it is locked into place by turning the dial on the side). 3.