Instructions / Assembly
DocaPole 24ft Ceiling Flex Fan Duster Assembly Instructions
1. To adjust extension pole length, raise thumb levers and pull
out pole segments to desired length, then lower thumb
levers to lock into place
2. Use the plastic hinge tip as needed to adjust the angle of the
desired attachment. Simply screw the female plastic hinge
tip directly onto the male metal tip of the pole, then screw
your attachment onto the angled hinge tip (make sure it is
locked into place by turning the dial on the side).
3. Screw the Ceiling Flex Fan Duster directly onto the Metal Tip
of the Pole (remember to unscrew the cap at the base of the
duster). If you need the duster to be at an angle, use the
included plastic Hinge Tip and adjust the angle as needed.
The Duster is meant to be bent and shaped as needed to fit
the dusting job at hand.
4. Enjoy your DocaPole and Ceiling Flex Fan Duster!