Instructions / Assembly

DocaPole 24ft Car Squeegee Kit Assembly Instructions
1. To adjust extension pole length, raise thumb levers and
pull out pole segments to desired length, then lower
thumb levers to lock into place
2. Screw female threaded base of the squeegee attachment
onto the male threaded metal tip of the DocaPole
extension pole. If you need to adjust the angle of the
squeegee, use the included Hinge Tip Attachment.
Adjust the Hinge Tip’s angle by turning the dial located
on the side. Remember to secure the tip by tightening
the dial before use.
3. Enjoy your DocaPole and Car Squeegee Kit!