Manual

2
Safety Instructions
DT-AC-VIMG-02E
Vision Kit
Item no: 2899516
1 Description of symbols
The following symbols are on the product/appliance or are used in this document or the ac-
companying operating/installation/maintenance instructions:
The symbol warns of hazards that can lead to personal injury.
The symbol warns of dangerous voltage that can lead to personal injury by elec-
tric shock.
WARNING
Indicates a hazard with a medium level or low level of risk which, if not avoided,
could result in minor or moderate injury.
DANGER
Indicates a hazard with a high level of risk which, if not avoided, could result in
death or serious injury.
NOTICE
A situation that, if not avoided, can cause personal injury or damage to the equipment. For
items marked with such signs, depending on the specific situation, there is sometimes a pos-
sibility of significant consequences.
NOTE
Provides additional information to emphasize or supplement important points in the main
text.
2 Safety instructions
Read this document and the accompanying operating instructions carefully
and especially observe the safety information. If you do not follow the
safety instructions and information on proper handling, we assume no liab-
ility for any resulting personal injury or damage to property. Such cases will
invalidate the warranty/guarantee.
2.1 General
■
The product is not a toy. Keep it out of the reach of children and pets.
■
Do not leave packaging material lying around carelessly. This may become dangerous
playing material for children.
■
If you have questions which remain unanswered by this information product, contact our
technical support service or other technical personnel.
■
Maintenance, modifications and repairs must only be completed by a technician or an
authorised repair centre.
2.2 Handling
■
Handle the product carefully. Jolts, impacts or a fall even from a low height can damage
the product.
2.3 Operating environment
■
Do not place the product under any mechanical stress.
■
Protect the appliance from extreme temperatures, strong jolts, flammable gases, steam
and solvents.
■
Protect the product from high humidity and moisture.
■
Protect the product from direct sunlight.
■
Do not switch the product on after it has been taken from a cold to a warm environment.
The condensation that forms might destroy the product. Allow the product to reach room
temperature before you use it.
2.4 Operation
■
Consult an expert when in doubt about the operation, safety or connection of the
product.
■
If it is no longer possible to operate the product safely, take it out of operation and pro-
tect it from any accidental use. DO NOT attempt to repair the product yourself. Safe op-
eration can no longer be guaranteed if the product:
– is visibly damaged,
– is no longer working properly,
– has been stored for extended periods in poor ambient conditions or
– has been subjected to any serious transport-related stresses.
2.5 LED light
■
Do not look directly into the LED light!
■
Do not look into the beam directly or with optical instruments!
2.6 Installation and connections
Switch off the main unit completely before installing, connecting and disconnecting compon-
ents to prevent damage to the main unit.
3 Disposal
This symbol must appear on any electrical and electronic equipment placed on
the EU market. This symbol indicates that this device should not be disposed of
as unsorted municipal waste at the end of its service life.
Owners of WEEE (Waste from Electrical and Electronic Equipment) shall dispose
of it separately from unsorted municipal waste. Spent batteries and accumulators,
which are not enclosed by the WEEE, as well as lamps that can be removed from
the WEEE in a non-destructive manner, must be removed by end users from the
WEEE in a non-destructive manner before it is handed over to a collection point.
Distributors of electrical and electronic equipment are legally obliged to provide free take-
back of waste. Conrad provides the following return options free of charge (more details on
our website):
■
in our Conrad offices
■
at the Conrad collection points
■
at the collection points of public waste management authorities or the collection points
set up by manufacturers or distributors within the meaning of the ElektroG
End users are responsible for deleting personal data from the WEEE to be disposed of.
It should be noted that different obligations about the return or recycling of WEEE may apply
in countries outside of Germany.
4 Technical data
Operating temperature ................... 0 to +40 °C
Operating humidity ......................... 20 - 85 % RH
Storage temperature....................... -20 to +40 °C
Storage humidity............................. 20 - 85 % RH
*2899516_V1_0923_jh_ss_en 996581259-2 I1/O1 en