Manual

DobotVisionStudio User Guide
Issue V4.1.2 (2022-06-08) User Guide Copyright © Yuejiang Technology Co., Ltd.
221
Y Scale Range
It indicates the variation range of the consistency scale of the target to be matched relative
to the created template. If you want to search for a target with a consistent scale change,
you need to set the corresponding settings.
Threshold Type
It includes auto threshold, manual threshold, and model threshold.
Speed Enable
After enabling it, you need to enter speed threshold.
Correct Flag
After enabling, the software will atomically correct the character position.
Width Tolerance
The degree that the width direction is allowed to deviate from the template.
Height Tolerance
The degree that the height direction is allowed to deviate from the template.
Character Rough Location
Min. Match Score
It refers to the degree of similarity between the feature template and the target in the
search image, that is, the similarity threshold. The searched target will only be searched
when the similarity reaches the threshold. The maximum is 1, indicating a complete fit,
and the default is 0.5.
Match Polarity
Polarity stands for the color transition from the feature pattern to the background. When
the edge polarity of the search target is inconsistent with the polarity of the feature
template, it is still necessary to ensure that the target is found. The matching polarity
needs to be set to ignore the polarity. If necessary, it can be set to consider the polarity,
which can shorten the search time.
Angle Range
It Indicates the angle change range of the target to be matched relative to the created
template. If you want to search for a target with a rotation change, you need to set it
accordingly. The default range is between -180° and 180°.
X Scale Range
It indicates the variation range of the consistency scale of the target to be matched relative
to the created template. If you want to search for a target with a consistent scale change,
you need to set the corresponding settings.
Y Scale Range
It indicates the variation range of the consistency scale of the target to be matched relative
to the created template. If you want to search for a target with a consistent scale change,
you need to set the corresponding settings.
Threshold Type
It includes auto threshold, manual threshold, and model threshold.
Speed Enable
After enabling it, you need to enter speed threshold.
11. Set in the result displaying in the image display interface, and click run once or run continuously
to run the flow.
Arc Edge Defect Detection
The tool of Arc edge defect detection can detect pits, bumps and fracture defects on the edges of
arcs. It can accurately recognize defective arcs and output defect information. The specific operation
method is shown below. It is recommended to enable Standard Input when the arc edge is blurry.