Manual
Table Of Contents
Dobot Vision Kit Installation Guide 2 Installation Guide
Issue V1.0（2018-09-12） User Guide Copyright © ShenZhen Yuejiang Technology Co., Ltd.
10
Figure 2.13 Adjust focal length
NOTICE
If there is not enough light in the environment, turn on the light source. Please turn on or
off the light source depending on the actual requirements. For the installation of light
source, please refer to Step 11 and Step 12.
Adjust brightness by rotating aperture, and lock aperture by rotating helix
switch.
Figure 2.14 Adjust aperture
Adjust exposure time or other parameters based on site requirements until
imaging can be appeared clearly.