Manual

2
Safety Instructions
DT-AC-MAP1-001
Mini Vacuum Pump Box (for MG400)
Item no: 2899519
1 Description of symbols
The following symbols are on the product/appliance or are used in this document or the ac-
companying operating/installation/maintenance instructions:
The symbol warns of hazards that can lead to personal injury.
The symbol warns of dangerous voltage that can lead to personal injury by elec-
tric shock.
WARNING
Indicates a hazard with a medium level or low level of risk which, if not avoided,
could result in minor or moderate injury.
DANGER
Indicates a hazard with a high level of risk which, if not avoided, could result in
death or serious injury.
NOTICE
A situation that, if not avoided, can cause personal injury or damage to the equipment. For
items marked with such signs, depending on the specific situation, there is sometimes a pos-
sibility of significant consequences.
NOTE
Provides additional information to emphasize or supplement important points in the main
text.
2 Safety instructions
Read this document and the accompanying operating instructions carefully
and especially observe the safety information. If you do not follow the
safety instructions and information on proper handling, we assume no liab-
ility for any resulting personal injury or damage to property. Such cases will
invalidate the warranty/guarantee.
2.1 General
■
The product is not a toy. Keep it out of the reach of children and pets.
■
Do not leave packaging material lying around carelessly. This may become dangerous
playing material for children.
■
If you have questions which remain unanswered by this information product, contact our
technical support service or other technical personnel.
■
Maintenance, modifications and repairs must only be completed by a technician or an
authorised repair centre.
2.2 Handling
■
Handle the product carefully. Jolts, impacts or a fall even from a low height can damage
the product.
2.3 Operating environment
■
Do not place the product under any mechanical stress.
■
Protect the appliance from extreme temperatures, strong jolts, flammable gases, steam
and solvents.
■
Protect the product from high humidity and moisture.
■
Protect the product from direct sunlight.
■
Do not switch the product on after it has been taken from a cold to a warm environment.
The condensation that forms might destroy the product. Allow the product to reach room
temperature before you use it.
2.4 Operation
■
Consult an expert when in doubt about the operation, safety or connection of the
product.
■
If it is no longer possible to operate the product safely, take it out of operation and pro-
tect it from any accidental use. DO NOT attempt to repair the product yourself. Safe op-
eration can no longer be guaranteed if the product:
– is visibly damaged,
– is no longer working properly,
– has been stored for extended periods in poor ambient conditions or
– has been subjected to any serious transport-related stresses.
3 Installation and connections
Switch off the main unit completely before installing, connecting and disconnecting compon-
ents to prevent damage to the main unit.
4 Technical data
Air pressure range.......................... -70 to 110 kPa
Noise level...................................... 65 dB
Ingress protection........................... IP 20
Rated voltage ................................. 24 V/DC ±10 %
Rate current.................................... 0.8 A
Peak current ................................... 1.2 A
*2899519_V1_0923_jh_ss_en 996581515-2 I1/O1 en