Manual
Table Of Contents
- 1. Introduction
- 2. FlickerLED Demo
- 3. AlarmLED Demo
- 4. AdjustLED Demo
- 5. Button Demo
- 6. SeedVoiceLED Demo
- 7. MoveBlock Demo
- 8. SeedVoiceDobot Demo
- 9. JoyStick Demo
- 10. DobotPixy Demo
- Appendix A Common Function Description
- Appendix B Installing Suction Cup Kit
- Appendix C Pixy Install and Configure Pixy
- Appendix D Vision Recognition Initialization Process
- Appendix E Multiplexed I/O Interface Description of V1 Dobot Magician
- Appendix F Multiplexed I/O Interface Description of V2 Dobot Magician
Arduino Kit Demo Description 8 SeedVoiceDobot Demo
Issue V2.1 (2019-12-05) Demo Description Copyright © Yuejiang Technology Co., Ltd
22
SeedVoiceDobot Demo
Introduction
This demo uses Grove speech recognizer to control the Dobot Magician movement and the air
pump start-stop.
Hardware Connection
Grove speech recognizer, Dobot Magician, air pump and Arduino Mega2560 are required in
this demo. The connection between Dobot Magician and Arduino is shown in Figure 8.1.
Figure 8.1 SeedVoiceDobot Connection
The connection between Dobot Magician and air pump is shown in Figure 8.2.
Figure 8.2 Air pump Connection