User Guide
Table Of Contents
- 1. Security Precautions
- 2. Introduction
- 3. Hardware Installation
- 4. Electrical Specifications
- 5. Installation and Commissioning
- 5.1 Installing Software
- 5.2 Connecting Power Supply
- 5.3 Connecting Emergency Stop Switch
- 5.4 Connecting External Cables
- 5.5 System Commissioning
- 6. Operation
- 7. Maintenance
Dobot M1 User Guide 6 Operation
Issue V1.0.4 (2018-08-30) User Guide Copyright © Yuejiang Technology Co., Ltd
70
Parameter
Description
Grayscale Range
Set the grayscale range
Value range: 0-255
Laser Power Range
Set the laser power range
Value range: 2-100
Laser Height
Set the laser height
Border Width
Set the border width of the picture
Value range: 0-50
XBias
Set XBias
DPI
Set DPI
Please wear the lasing protective eyeglass before adjusting focus.
Click the icon of Motor on the Operation Panel pane of the M1Studio
page and move Dobot M1 by hand to a proper height, to make the laser dot on the
material burn the brightest. When the laser power is enough, you can view burn
marks on the material.
NOTICE
Please wear the lasing protective eyeglass before adjusting focal length.
If the focal length still cannot focus, you can rotate clockwise the focal length of the
laser head to adjust, as shown in Figure 6.18.
Figure 6.18 Adjust focus
DANGER
The laser can heat objects when it is in a focused state, so objects like paper or wood