User Guide
Table Of Contents
- 1. Security Precautions
- 2. Introduction
- 3. Hardware Installation
- 4. Electrical Specifications
- 5. Installation and Commissioning
- 5.1 Installing Software
- 5.2 Connecting Power Supply
- 5.3 Connecting Emergency Stop Switch
- 5.4 Connecting External Cables
- 5.5 System Commissioning
- 6. Operation
- 7. Maintenance
Dobot M1 User Guide 6 Operation
Issue V1.0.4 (2018-08-30) User Guide Copyright © Yuejiang Technology Co., Ltd
62
Figure 6.9 Overwrite the current saved point
Table 6.4 lists the location description of a saved point.
Table 6.4 Description of the location of a saved point
Insert Location
Description
Add At Last
Add a new point after the last saved point.
Insert Before Selected Row
Insert a point before the current saved point
OverWrite Selected Row
Overwrite the current saved point
Select a saved point and double-click the parameters on the line to modify the relevant
information. The saved point information is shown as Figure 6.10.
Figure 6.10 The saved point information