User Guide
Table Of Contents
- 1. Security Precautions
- 2. Introduction
- 3. Hardware Installation
- 4. Electrical Specifications
- 5. Installation and Commissioning
- 5.1 Installing Software
- 5.2 Connecting Power Supply
- 5.3 Connecting Emergency Stop Switch
- 5.4 Connecting External Cables
- 5.5 System Commissioning
- 6. Operation
- 7. Maintenance
Dobot M1 User Guide 5 Installation and Commissioning
Issue V1.0.4 (2018-08-30) User Guide Copyright © Yuejiang Technology Co., Ltd
46
Figure 5.15 Emergency stop
Dobot M1 is stopped immediately with an alarm about emergency stop and the red
LED indicator on the base is on, which indicates that the emergency stop function is
OK.
The emergency stop button is bumped when rotating to 45°, which indicates the
stopped status is cleared.
Figure 5.16 Alarm tip