User Guide
Table Of Contents
- 1. Security Precautions
- 2. Introduction
- 3. Hardware Installation
- 4. Electrical Specifications
- 5. Installation and Commissioning
- 5.1 Installing Software
- 5.2 Connecting Power Supply
- 5.3 Connecting Emergency Stop Switch
- 5.4 Connecting External Cables
- 5.5 System Commissioning
- 6. Operation
- 7. Maintenance
Dobot M1 User Guide 5 Installation and Commissioning
Issue V1.0.4 (2018-08-30) User Guide Copyright © Yuejiang Technology Co., Ltd
45
Figure 5.14 IP address modification
If Disconnect turns to Connect, Dobot M1 is disconnected from the PC.
If Connect turns to Disconnect, the connection by the network cable is successful.
Debugging Emergency Stop Function
Prerequisites
Dobot M1 has been powered on.
Dobot M1 has been connected to a PC successfully.
Dobot M1 has been connected to an emergency stop switch.
Procedure