User Guide
Table Of Contents
- 1. Security Precautions
- 2. Introduction
- 3. Hardware Installation
- 4. Electrical Specifications
- 5. Installation and Commissioning
- 5.1 Installing Software
- 5.2 Connecting Power Supply
- 5.3 Connecting Emergency Stop Switch
- 5.4 Connecting External Cables
- 5.5 System Commissioning
- 6. Operation
- 7. Maintenance
Dobot M1 User Guide 5 Installation and Commissioning
Issue V1.0.4 (2018-08-30) User Guide Copyright © Yuejiang Technology Co., Ltd
39
Connecting External Cables
Connecting Serial Port
Prerequisites
Please prepare USB to serial line. One end is standard USB port, the other end is 9-pins serial
port.
Procedure
Figure 5.9 The serial port connection
After startup, you can check the corresponding serial information from the serial
drop-down list on the upper left pane of the M1Studio page.
Figure 5.10 The serial information of M1Studio
Connecting Network Cable
You can connect Dobot M1 to a PC over a network cable.
Prerequisites