User Guide
Table Of Contents
- 1. Security Precautions
- 2. Introduction
- 3. Hardware Installation
- 4. Electrical Specifications
- 5. Installation and Commissioning
- 5.1 Installing Software
- 5.2 Connecting Power Supply
- 5.3 Connecting Emergency Stop Switch
- 5.4 Connecting External Cables
- 5.5 System Commissioning
- 6. Operation
- 7. Maintenance
Dobot M1 User Guide 3 Hardware Installation
Issue V1.0.4 (2018-08-30) User Guide Copyright © Yuejiang Technology Co., Ltd
21
Figure 3.10 Air pump connection
NOTICE
When air pump is connected to I/O interface, the terminals of air pump cannot be exposed
to the air, to avoid short circuit. For matching all I/O interfaces, terminals of air pump
will be slightly longer. If that happens, you need to cut them to an appropriate length.
Figure 3.11 and Figure 3.12 show the standard and non-standard connection of the
terminals respectively.
Figure 3.11 Standard connection