User Guide
Table Of Contents
- 1. Security Precautions
- 2. Introduction
- 3. Hardware Installation
- 4. Electrical Specifications
- 5. Installation and Commissioning
- 5.1 Installing Software
- 5.2 Connecting Power Supply
- 5.3 Connecting Emergency Stop Switch
- 5.4 Connecting External Cables
- 5.5 System Commissioning
- 6. Operation
- 7. Maintenance
Dobot M1 User Guide 7 Maintenance
Issue V1.0.4 (2018-08-30) User Guide Copyright © Yuejiang Technology Co., Ltd
104
The M1Studio tool page is displayed.
If Connect turns to Disconnect, the connection is successful, and Dobot M1 can be
controlled by M1Studio.
Move Dobot M1 with righty hand orientation to touch the calibrated point that is on
the A4 sheet of paper, as shown in Figure 7.18.
Figure 7.18 Calibration as righty hand orientation
The value of P1 is J2 coordinate with righty hand orientation, as shown in Figure
7.19.