User Guide
Table Of Contents
- 1. Security Precautions
- 2. Introduction
- 3. Hardware Installation
- 4. Electrical Specifications
- 5. Installation and Commissioning
- 5.1 Installing Software
- 5.2 Connecting Power Supply
- 5.3 Connecting Emergency Stop Switch
- 5.4 Connecting External Cables
- 5.5 System Commissioning
- 6. Operation
- 7. Maintenance
Dobot M1 User Guide 7 Maintenance
Issue V1.0.4 (2018-08-30) User Guide Copyright © Yuejiang Technology Co., Ltd
97
Figure 7.7 Forearm of Dobot M1
Cut off the wire tie that fixed the original battery, as shown in Figure 7.8.
Figure 7.8 Location of battery holder on Forearm
Remove the original battery and disconnect the connector of the battery to the
battery adapter cable, as shown in Figure 7.9.