User Guide

Dobot M1 PRO Hardware User Guide

 Do not touch the terminal blocks or remove the interval circuit components in 10

minutes after the power is shut off, to avoid an electric shock since there is residual

capacitance inside the robot.

 Even if the power switch of the robot is already in the OFF status, touching the

terminal blocks or removing the interval circuit components is not allowed, to avoid

an electric shock since there is residual capacitance inside the robot.

 When working with robots, please do not wear loose clothing or jewelry. When

operating the robot, make sure that the long hair bundle is behind your head.

 If the robot appears to have stopped during the operation of the equipment, it may

be because the robot is waiting for the start signal and is in the state of being about

to move. In this case, the robot should also be considered to be in motion, please do

not approach the robot.

 Please ensure that the robot establishes safety measures near the operation area,

such as guardrails, to protect the operator and surrounding people.