User Guide

Dobot M1 PRO Hardware User Guide

RF source without shielding, otherwise, it could lead to robot abnormally.

 When the operator commissioning or operates the equipment, it shall be done in the

safe space of the equipment.

WARNING

 In order to protect the equipment and personal safety, when turning off the power,

please press the switch, then unplug the AC power cable. The power is disconnected

by plug and socket.

 Before the operation, please wear protective clothing, such as antistatic uniform,

protective gloves, and protective shoes.

 It is prohibited to modify or remove the nameplates, instructions, icons, and marks

on the robot and the related equipment.

 Before operating and maintaining the robot, the personnel responsible for the

installation, operation and maintenance must be trained to understand the various

security precautions and to master the correct methods of operation, and

maintenance.

 Be careful during the robot carrying or installing. Please follow the instructions on

the packing box to put down the robot gently and place it correctly in direction of

the arrow.

 Please use the matched cables when connecting a robot to internal or external

equipment for personal security and equipment protection.

 Please ensure that robot and tools are installed correctly.

 Please ensure that the robot has enough space to move freely.

 If the robot is damaged, please do not continue to use it.

 Any impact will release a lot of kinetic energy, which is much higher than that under

high speed and high load.

Personal Security

When operating the robot system, it is necessary to ensure the personal safety of the operator.

The general precautions are listed below, please strictly follow.

WARNING

 To reduce the risk of personal injury, please comply with local regulations with

regard to the maximum weight one person is permitted to carry.

 Do not touch the terminal blocks or disassemble the equipment with the power ON.

Otherwise, it may result in an electric shock

 Please confirm that the equipment is well grounded, otherwise it will endanger

personal safety.