User Guide

Dobot M1 PRO Hardware User Guide

circuit, otherwise, it is vulnerable to injury the device or the person.

 You should comply with the local laws and regulations when operating the robot.

The security precautions in this document are only supplemental to the local laws

and regulations.

 Please use the robot in the specified environment scope. If not, exceeding the

specifications or load conditions will shorten the service life of the robot, even

damage it.

 Please ensure that the robot is operated under the security conditions and there is no

harmful object around the robot.

 Turning on or off the power continually may result in that the performance of the

main circuit components inside the robot is degraded. If turning on or off the power

continually is required, please keep frequency less than once a minute.

NOTICE

 The personnel responsible for installation, operation and maintenance of equipment

must first undergo rigorous training, understand various safety precautions, and

master the correct operation and maintenance methods before they can operate and

maintain equipment.

 Personnel without professional training shall not disassemble and repair the

equipment without authorization. If the device fails, please contact Shenzhen

Yuejiang Technology Co., Ltd technical support engineer in time.

 Be sure to carry out daily inspections and regular maintenance, and replace faulty

components in time to ensure the safe operation of the equipment.

 If the equipment is scrapped, please comply with relevant laws to properly handle

industrial waste and protect the environment.

 In order to prevent personnel from accidentally entering the working space of the

robotic arm, be sure to set up safety fence to prevent personnel from entering the

hazardous area.

 Before operating the robot, make sure that no one is inside the safety fence. When

operating the robot, be sure to operate outside the safety fence.

 Do not expose the robot to permanent magnetic fields all the time. Strong magnetic

fields can cause damage to the robot.

 Shenzhen Yuejiang Technology Co., Ltd. assumes no responsibility for robot

damage or personal injury caused by failure to follow product instructions or other

improper operations.

 Shenzhen Yuejiang Technology Co., Ltd. is not responsible for the damage caused

during the transportation and handling of equipment.

 Please make sure that the robot is in the packing posture before packaging, and the

brakes on each axis are normal.